Netgear R7000
R7000-100NAS - Netgear Nighthawk AC1900 Dual Band WiFi Router.
Specifications
- CPU
- 1GHz dual-core
- USB
- 2x USB 3.0
- Wi-Fi
- 2.4GHz 600Mbps + 5GHz 1300Mbps
- Ports
- 4x Gigabit
Potential Threats
136 Known CVEs
Default IP
192.168.1.1
Default admin panel address for Netgear R7000
Default Credentials — Netgear R7000
Known CVE Vulnerabilities (136)
FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, does not properly validate TLS certificates when downloading up...
FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, exposes an HTTP server over the LAN interface of affected devic...
In Netgear R7000 V1.3.1.64_10.1.36 and EAX80 V1.0.1.70_1.0.2, the USERLIMIT_GLOBAL option is set to 0 in the bftpd.conf configuration file. This can c...
Netgear R7000 1.0.11.136 is vulnerable to Command Injection in RMT_invite.cgi via device_name2 parameter.
NETGEAR Multiple Routers httpd Missing Authentication for Critical Function Information Disclosure Vulnerability. This vulnerability allows network-ad...
NETGEAR Multiple Routers httpd Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers t...
A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of...
A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functi...
Buffer Overflow vulnerability in NETGEAR R6400v2 before version 1.0.4.118, allows remote unauthenticated attackers to execute arbitrary code via craft...
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers....
Showing 10 of 136
FAQ
The most common default credentials for Netgear R7000 are listed in the table above. Always change these immediately after setup.
The default username for Netgear R7000 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
The default admin login address for Netgear R7000 is shown in the "Default IP" field above. Most routers use 192.168.1.1 or 192.168.0.1. Open a browser on a device connected to the router and navigate to that IP.
Log in to the router admin panel at the default IP address. Go to Wireless or Wi-Fi settings. Find the WPA2/WPA3 passphrase field and update it. Save and reconnect your devices.
Change the default admin password and Wi-Fi password immediately. Disable WPS (Wi-Fi Protected Setup) — it is vulnerable to brute-force attacks. Enable WPA3 encryption if supported. Turn off remote management unless needed. Keep firmware updated.
Netgear R7000 has 136 known CVE vulnerabilities documented in our database. The full list with severity ratings is shown on this page. Apply the latest firmware update from the manufacturer to address known issues.
