Netgear R6700
R6700-100NAS - Netgear Nighthawk AC1750 Smart WiFi Router.
Specifications
- CPU
- Dual-core 1GHz
- Wi-Fi
- 2.4GHz 450Mbps + 5GHz 1300Mbps
- Ports
- 4x Gigabit LAN + 1x Gigabit WAN + 2x USB
Potential Threats
173 Known CVEs
Default IP
192.168.1.1
Default admin panel address for Netgear R6700
Default Credentials — Netgear R6700
| Username | Password | Access Type | Protocol | Port | Notes |
|---|---|---|---|---|---|
| web | HTTP | 80 |
Known CVE Vulnerabilities (173)
Netgear D6220 with Firmware Version 1.0.0.80, D8500 with Firmware Version 1.0.3.60, R6700 with Firmware Version 1.0.2.26, and R6900 with Firmware Vers...
Buffer Overflow vulnerability found in Netgear R6900 v.1.0.2.26, R6700v3 v.1.0.4.128, R6700 v.1.0.0.26 allows a remote attacker to execute arbitrary c...
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers....
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers....
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700v3 routers. Authentication is...
This vulnerability allows network-adjacent attackers to compromise the integrity of downloaded information on affected installations of NETGEAR R6700v...
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers....
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers....
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers....
Netgear Nighthawk R6700 version 1.0.4.120 makes use of a hardcoded credential. It does not appear that normal users are intended to be able to manipul...
Showing 10 of 173
FAQ
The most common default credentials for Netgear R6700 are listed in the table above. Always change these immediately after setup.
The default username for Netgear R6700 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
The default admin login address for Netgear R6700 is shown in the "Default IP" field above. Most routers use 192.168.1.1 or 192.168.0.1. Open a browser on a device connected to the router and navigate to that IP.
Log in to the router admin panel at the default IP address. Go to Wireless or Wi-Fi settings. Find the WPA2/WPA3 passphrase field and update it. Save and reconnect your devices.
Change the default admin password and Wi-Fi password immediately. Disable WPS (Wi-Fi Protected Setup) — it is vulnerable to brute-force attacks. Enable WPA3 encryption if supported. Turn off remote management unless needed. Keep firmware updated.
Netgear R6700 has 173 known CVE vulnerabilities documented in our database. The full list with severity ratings is shown on this page. Apply the latest firmware update from the manufacturer to address known issues.
