HPE HPE Aruba 515 IAP

- The HPE Aruba 515 IAP is a compact, high-performance indoor access point designed for small to medium-sized businesses and enterprise environments.

Specifications

OS: ArubaOS / InstantOS
CPU: Dual-core ARM
LAN: 1x 2.5GbE
PoE: 802.3af/at
QoS: Yes
USB: 1x USB 2.0
Mode: Indoor
Wi-Fi: 802.11ax
Bands: 2.4/5 GHz
Ports: 1x 2.5GbE, 1x USB 2.0
Radios: 2
Antenna: Internal
Max Clients: 512
MU-MIMO: Yes
Antennas: 4 integrated downtilt omni
Channels: 20/40/80/160 MHz
LAN Ports: 1
Controller: Instant or controller-managed
Management: Web, CLI, Aruba Central, AirWave
Operating Temp: 0 to 50°C

Potential Threats

No known vulnerabilities found for this device.

Disable WPS — it is trivially bruteforced. Use WPA3 or WPA2-Enterprise. Restrict management access by IP.

Default IP

192.168.1.250

Default admin panel address for HPE HPE Aruba 515 IAP

IP Info Open Admin Panel

Default Credentials — HPE HPE Aruba 515 IAP

Password	Access Type	Protocol	Port
(blank)	web	HTTPS	4343
(blank)	ssh	SSH	22
(blank)	console	Console	—

FAQ

What is the default password for HPE HPE Aruba 515 IAP?

The most common default credentials for HPE HPE Aruba 515 IAP are listed in the table above. Always change these immediately after setup.

What is the default username for HPE HPE Aruba 515 IAP?

The default username for HPE HPE Aruba 515 IAP is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.

How do I change the password on HPE HPE Aruba 515 IAP?

Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.

How do I reset HPE HPE Aruba 515 IAP to factory defaults?

Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.

Is it safe to leave default credentials unchanged?

No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.

Does HPE HPE Aruba 515 IAP have known security vulnerabilities?

No CVE vulnerabilities have been linked to HPE HPE Aruba 515 IAP in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.

Related Devices