HPE HPE Aruba 345 IAP
- The HPE Aruba 345 IAP is a wireless access point designed for enterprise networks, providing reliable and secure connectivity.
Specifications
- OS
- ArubaOS
- LAN
- 1x 10/100/1000 Ethernet
- PoE
- 802.3af/at
- QoS
- Yes
- USB
- 1x USB 2.0
- Mode
- AP, Mesh, Monitor
- Wi-Fi
- 802.11ac Wave 2
- Bands
- 2.4 GHz, 5 GHz
- Ports
- 1x GE, 1x USB 2.0
- Radios
- 2
- Antenna
- Integrated omni-directional
- Max Clients
- 512
- MU-MIMO
- 4x4
- Antennas
- 4 internal
- Channels
- 2.4 GHz 3 non-overlapping, 5 GHz up to 23
- LAN Ports
- 1
- Controller
- Aruba Instant, Aruba Mobility Controller
- Management
- Web, Aruba Central, CLI, SNMP
- Operating Temp
- 0°C to 50°C
Potential Threats
Default IP
192.168.1.250
Default admin panel address for HPE HPE Aruba 345 IAP
Default Credentials — HPE HPE Aruba 345 IAP
FAQ
The most common default credentials for HPE HPE Aruba 345 IAP are listed in the table above. Always change these immediately after setup.
The default username for HPE HPE Aruba 345 IAP is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to HPE HPE Aruba 345 IAP in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
