Access Point

Cambium Networks Cambium ePMP Force 300

- The Cambium Networks ePMP Force 300 is a high-performance, outdoor wireless access point designed for challenging environments.

Specifications

CPU: Qualcomm Atheros 750 MHz
LAN: 1x GE
PoE: 24V Passive PoE
RAM: 128 MB
Mode: AP/Station
Wi-Fi: 802.11ac Wave 2
Bands: 5 GHz
Ports: 1x RJ45
Range: up to 40 km
Radios: 1
Antenna: 25 dBi integrated dish
MU-MIMO: 2x2
LAN Ports: 1
Management: Web, SNMP
Throughput: up to 600 Mbps
Operating Temp: -30 to 60 C

Potential Threats

No known vulnerabilities found for this device.

Disable WPS — it is trivially bruteforced. Use WPA3 or WPA2-Enterprise. Restrict management access by IP.

Default IP

169.254.1.1

Default admin panel address for Cambium Networks Cambium ePMP Force 300

IP Info Open Admin Panel

Default Credentials — Cambium Networks Cambium ePMP Force 300

Username	Password	Access Type	Protocol	Port	Notes
		web	HTTP	80
		web	HTTPS	443

FAQ

What is the default password for Cambium Networks Cambium ePMP Force 300?

The most common default credentials for Cambium Networks Cambium ePMP Force 300 are listed in the table above. Always change these immediately after setup.

What is the default username for Cambium Networks Cambium ePMP Force 300?

The default username for Cambium Networks Cambium ePMP Force 300 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.

How do I change the password on Cambium Networks Cambium ePMP Force 300?

Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.

How do I reset Cambium Networks Cambium ePMP Force 300 to factory defaults?

Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.

Is it safe to leave default credentials unchanged?

No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.

Does Cambium Networks Cambium ePMP Force 300 have known security vulnerabilities?

No CVE vulnerabilities have been linked to Cambium Networks Cambium ePMP Force 300 in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.

Related Devices