Cambium Networks Cambium PTP 670
- The Cambium PTP 670 is a point-to-point wireless bridge designed for long-range, high-speed connectivity.
Specifications
- PoE
- Yes
- Mode
- PTP
- Wi-Fi
- 802.11n-based proprietary microwave
- Bands
- 6 GHz
- Ports
- 1x GE
- Range
- 250 km
- Radios
- 1
- Management
- Web, SNMP
- Throughput
- 450 Mbps
- Operating Temp
- -33 to 60°C
Potential Threats
Default IP
169.254.1.1
Default admin panel address for Cambium Networks Cambium PTP 670
Default Credentials — Cambium Networks Cambium PTP 670
FAQ
The most common default credentials for Cambium Networks Cambium PTP 670 are listed in the table above. Always change these immediately after setup.
The default username for Cambium Networks Cambium PTP 670 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to Cambium Networks Cambium PTP 670 in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
