TP-Link TP-Link RE300
- The TP-Link RE300 is a wireless range extender that amplifies your Wi-Fi signal to provide reliable coverage throughout your home or office.
Specifications
- LAN
- 10/100 Mbps
- Mode
- Range Extender, Access Point
- Wi-Fi
- 802.11a/b/g/n/ac
- Bands
- 2.4 GHz, 5 GHz
- Ports
- 1x FE
- Range
- Up to 1200 sq ft
- Antenna
- 2x internal
- Channels
- 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps
- LAN Ports
- 1x FE
Potential Threats
Default IP
http://tplinkwifi.net
Default admin panel address for TP-Link TP-Link RE300
Default Credentials — TP-Link TP-Link RE300
FAQ
The most common default credentials for TP-Link TP-Link RE300 are listed in the table above. Always change these immediately after setup.
The default username for TP-Link TP-Link RE300 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to TP-Link TP-Link RE300 in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
