QNAP QNAP TVS-h674
- QNAP TVS-h674 is a high-performance NAS device designed for small to medium-sized businesses and homes.
Specifications
- OS
- QuTS hero
- CPU
- Intel Core i5-12400
- LAN
- 2.5GbE
- RAM
- 16 GB DDR4
- USB
- 2x USB 3.2 Gen 2, 2x USB 2.0
- Drive Bays
- 6 bays
- Flash
- 5 GB eMMC
- Ports
- 1x HDMI 1.4b
- Storage
- 6x 3.5/2.5-inch SATA 6Gb/s, 2x M.2 2280 PCIe Gen3 x4 NVMe
- LAN Ports
- 2x 2.5GbE
- Controller
- Intel UHD Graphics 730
Potential Threats
Default IP
192.168.1.100
Default admin panel address for QNAP QNAP TVS-h674
Default Credentials — QNAP QNAP TVS-h674
FAQ
The most common default credentials for QNAP QNAP TVS-h674 are listed in the table above. Always change these immediately after setup.
The default username for QNAP QNAP TVS-h674 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to QNAP QNAP TVS-h674 in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
