Netgear Netgear M4250-10G2XF-PoE+
- The Netgear M4250-10G2XF-PoE+ is a managed switch that provides 10 Gigabit Ethernet ports, PoE+, and advanced security features.
Specifications
- PoE
- PoE+
- QoS
- Yes
- Layer
- L2/L3
- Ports
- 8x 1G RJ45 PoE+ + 2x 1G SFP + 2x 10G SFP+
- VLANs
- Yes
- Uplinks
- 2x 1G SFP, 2x 10G SFP+
- LAN Ports
- 8x 1G RJ45 PoE+
- Max VLANs
- 4093
- PoE Ports
- 8
- Switching Capacity
- 56 Gbps
- Management
- Web, CLI, SNMP
- PoE Budget
- 180 W
- Operating Temp
- 0 to 50°C
Potential Threats
Default IP
192.168.1.239
Default admin panel address for Netgear Netgear M4250-10G2XF-PoE+
Default Credentials — Netgear Netgear M4250-10G2XF-PoE+
FAQ
The most common default credentials for Netgear Netgear M4250-10G2XF-PoE+ are listed in the table above. Always change these immediately after setup.
The default username for Netgear Netgear M4250-10G2XF-PoE+ is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to Netgear Netgear M4250-10G2XF-PoE+ in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
