MikroTik MikroTik CRS328-24P-4S+RM
- The MikroTik CRS328-24P-4S+RM is a powerful 28-port Gigabit Ethernet switch with PoE and SFP+ ports, designed for small to medium-sized networks.
Specifications
- OS
- RouterOS / SwOS
- CPU
- 98DX3236 800 MHz
- PoE
- 802.3af/at
- RAM
- 512 MB
- USB
- 1x USB
- Flash
- 16 MB
- Layer
- L2/L3
- Ports
- 24x GE PoE + 4x 10G SFP+
- VLANs
- Yes
- PoE Out
- Passive PoE, 802.3af/at
- Uplinks
- 4x 10G SFP+
- LAN Ports
- 24x GE PoE
- PoE Ports
- 24
- Switching Capacity
- 128 Gbps
- Management
- Web, CLI, SNMP
- PoE Budget
- 450 W
- Throughput
- 95.2 Mpps
- Operating Temp
- -20 to 60 C
Potential Threats
Default IP
192.168.88.1
Default admin panel address for MikroTik MikroTik CRS328-24P-4S+RM
Default Credentials — MikroTik MikroTik CRS328-24P-4S+RM
FAQ
The most common default credentials for MikroTik MikroTik CRS328-24P-4S+RM are listed in the table above. Always change these immediately after setup.
The default username for MikroTik MikroTik CRS328-24P-4S+RM is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to MikroTik MikroTik CRS328-24P-4S+RM in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
