MikroTik MikroTik cAPGi-5HaxD2HaxD
- The MikroTik cAPGi-5HaxD2HaxD is a wireless access point designed for high-density deployments, offering robust performance and advanced features.
Specifications
- OS
- RouterOS v7, Level 4
- CPU
- IPQ-6010 4-core 864 MHz
- LAN
- Gigabit Ethernet
- PoE
- 802.3af/at
- RAM
- 1 GB
- Mode
- AP
- Wi-Fi
- Wi-Fi 6 (802.11ax)
- Bands
- 2.4 GHz, 5 GHz
- Flash
- 128 MB NAND
- Ports
- 2x GE
- Radios
- 2
- Antenna
- 2.4 GHz 6 dBi, 5 GHz 5.5 dBi
- MU-MIMO
- Yes
- PoE Out
- Passive PoE
- Storage
- 128 MB
- Antennas
- 2
- Bandwidth
- 2.4 GHz 574 Mbps, 5 GHz 1200 Mbps
- LAN Ports
- 2
- PoE Ports
- 1
- Management
- RouterOS, CAPsMAN
- Operating Temp
- -40 to 50 C
Potential Threats
Default IP
192.168.88.1
Default admin panel address for MikroTik MikroTik cAPGi-5HaxD2HaxD
Default Credentials — MikroTik MikroTik cAPGi-5HaxD2HaxD
FAQ
The most common default credentials for MikroTik MikroTik cAPGi-5HaxD2HaxD are listed in the table above. Always change these immediately after setup.
The default username for MikroTik MikroTik cAPGi-5HaxD2HaxD is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to MikroTik MikroTik cAPGi-5HaxD2HaxD in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
