Foscam Foscam FN3109H
- The Foscam FN3109H is a network video recorder (NVR) that supports up to 8 cameras and offers remote viewing capabilities.
Specifications
- OS
- Embedded Linux
- LAN
- 1x FE
- USB
- 2x USB 2.0
- Drive Bays
- 2
- Audio
- 1x RCA in, 1x RCA out
- Ports
- 1x Fast Ethernet, 2x USB 2.0
- Storage
- 2x SATA
- Channels
- 9-channel
- LAN Ports
- 1
- Resolution
- 1080p
- Compression
- H.264
Potential Threats
Default IP
192.168.1.2
Default admin panel address for Foscam Foscam FN3109H
Default Credentials — Foscam Foscam FN3109H
| Username | Password | Access Type | Protocol | Port | Notes |
|---|---|---|---|---|---|
| (blank) | web | HTTP | 80 |
FAQ
The most common default credentials for Foscam Foscam FN3109H are listed in the table above. Always change these immediately after setup.
The default username for Foscam Foscam FN3109H is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to Foscam Foscam FN3109H in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
