Switch

Extreme Networks Extreme Networks X870-32c

- The Extreme Networks X870-32c is a high-performance, Layer 3 switch designed for campus and data center networks.

Specifications

OS: Switch Engine
LAN: 10GbE/25GbE/40GbE/100GbE
QoS: Yes
USB: 1x USB
DIN Rail: 1U
Layer: L3
Ports: 32x 100/1000/2.5G/5G/10G SFP+
VLANs: 4094
Uplinks: 4x 40/100GbE QSFP28
LAN Ports: 32
Max VLANs: 4094
Switching Capacity: 2.56 Tbps
Management: CLI, SNMP, Web, ExtremeCloud IQ
Throughput: 1905 Mpps
Operating Temp: 0 to 45 C

Potential Threats

No known vulnerabilities found for this device.

Disable all unused ports. Enable port security and 802.1X authentication. Use separate VLANs for management traffic.

Default IP

192.168.100.1

Default admin panel address for Extreme Networks Extreme Networks X870-32c

IP Info Open Admin Panel

Default Credentials — Extreme Networks Extreme Networks X870-32c

Username	Password	Access Type	Protocol	Port	Notes
	(blank)	console	Console	—
	(blank)	ssh	SSH	22

FAQ

What is the default password for Extreme Networks Extreme Networks X870-32c?

The most common default credentials for Extreme Networks Extreme Networks X870-32c are listed in the table above. Always change these immediately after setup.

What is the default username for Extreme Networks Extreme Networks X870-32c?

The default username for Extreme Networks Extreme Networks X870-32c is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.

How do I change the password on Extreme Networks Extreme Networks X870-32c?

Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.

How do I reset Extreme Networks Extreme Networks X870-32c to factory defaults?

Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.

Is it safe to leave default credentials unchanged?

No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.

Does Extreme Networks Extreme Networks X870-32c have known security vulnerabilities?

No CVE vulnerabilities have been linked to Extreme Networks Extreme Networks X870-32c in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.