D-Link DCS-936L
D-Link HD 720p Wi-Fi Camera with cloud recording.
Specifications
- Wi-Fi
- 802.11n
- Cloud Management
- mydlink
- IR Range
- 5m
- Resolution
- 1280x720
Potential Threats
2 Known CVEs
Default IP
192.168.0.20
Default admin panel address for D-Link DCS-936L
Default Credentials — D-Link DCS-936L
| Username | Password | Access Type | Protocol | Port | Notes |
|---|---|---|---|---|---|
| (blank) | web | HTTP | 80 |
Known CVE Vulnerabilities (2)
D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such...
D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substr...
FAQ
The most common default credentials for D-Link DCS-936L are listed in the table above. Always change these immediately after setup.
The default username for D-Link DCS-936L is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
D-Link DCS-936L has 2 known CVE vulnerabilities documented in our database. The full list with severity ratings is shown on this page. Apply the latest firmware update from the manufacturer to address known issues.
