Cisco Cisco RV260W
- The Cisco RV260W is a wireless-N router designed for small to medium-sized businesses and homes, offering advanced security features and easy setup.
Specifications
- OS
- Cisco RV Series Firmware
- CPU
- Dual-core
- DSL
- No
- IDS/IPS
- Yes
- LAN
- Gigabit Ethernet
- PoE
- No
- QoS
- Yes
- RAM
- 256 MB
- USB
- 2x USB 3.0
- UTM
- No
- VPN
- IPsec/PPTP/L2TP/OpenVPN
- WAN
- Gigabit Ethernet
- Mode
- Router
- Wi-Fi
- 802.11ac Wave 2
- Bands
- 2.4 GHz / 5 GHz
- Cloud Management
- No
- Flash
- 128 MB
- Layer
- L3
- Ports
- 8x RJ-45
- VLANs
- Yes
- Radios
- 2
- SD-WAN
- No
- Max Clients
- 100
- MU-MIMO
- Yes
- Antennas
- 4
- Cellular
- No
- Firewall
- Yes
- Sessions
- ~25,000
- Auto MDI/X
- Yes
- LAN Ports
- 8x GE
- Max VLANs
- 15
- Switching Capacity
- Layer 2
- VPN Peers
- 20
- WAN Ports
- 2x GE
- Controller
- No
- Management
- Web UI
- Throughput
- Up to 900 Mbps
- SSL Inspection
- No
Potential Threats
25 Known CVEs
Default IP
192.168.1.1
Default admin panel address for Cisco Cisco RV260W
Default Credentials — Cisco Cisco RV260W
| Username | Password | Access Type | Protocol | Port | Notes |
|---|---|---|---|---|---|
| web | HTTPS | 443 |
Known CVE Vulnerabilities (25)
A vulnerability in the Modbus preprocessor of the Snort detection engine could allow an unauthenticated, remote attacker to cause a denial of service...
A vulnerability in the web-based management interface of Cisco Small Business Routers RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allo...
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an aut...
A vulnerability in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, and RV082 Routers could allow an unauthenticated,...
A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticat...
Multiple vulnerabilities in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauth...
Multiple vulnerabilities in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauth...
A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated...
Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could all...
Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could all...
Showing 10 of 25
FAQ
The most common default credentials for Cisco Cisco RV260W are listed in the table above. Always change these immediately after setup.
The default username for Cisco Cisco RV260W is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
The default admin login address for Cisco Cisco RV260W is shown in the "Default IP" field above. Most routers use 192.168.1.1 or 192.168.0.1. Open a browser on a device connected to the router and navigate to that IP.
Log in to the router admin panel at the default IP address. Go to Wireless or Wi-Fi settings. Find the WPA2/WPA3 passphrase field and update it. Save and reconnect your devices.
Change the default admin password and Wi-Fi password immediately. Disable WPS (Wi-Fi Protected Setup) — it is vulnerable to brute-force attacks. Enable WPA3 encryption if supported. Turn off remote management unless needed. Keep firmware updated.
Cisco Cisco RV260W has 25 known CVE vulnerabilities documented in our database. The full list with severity ratings is shown on this page. Apply the latest firmware update from the manufacturer to address known issues.
