Router
Cisco

Cisco Cisco RV260

- The Cisco RV260 is a compact, all-in-one router designed for small to medium-sized businesses and home offices.

Cisco Cisco RV260

Specifications

OS
Cisco RVOS
CPU
Dual-core
LAN
Gigabit Ethernet
QoS
Yes
RAM
512 MB
USB
1x USB 3.0
VPN
IPsec, PPTP, L2TP, SSL VPN

Potential Threats

9
Critical
2
High
14
Medium
0
Low

25 Known CVEs

9 critical vulnerabilities found — immediate patching required.
Change the default admin password and login URL. Disable WPS and remote management. Enable WPA3 if supported.

Default IP

192.168.1.1

Default admin panel address for Cisco Cisco RV260

Default Credentials — Cisco Cisco RV260

Username Password Access Type Protocol Port Notes
web HTTPS 443

Known CVE Vulnerabilities (25)

Sort:
CVE-2022-20845 2024

A vulnerability in the TL1 function of Cisco Network Convergence System (NCS) 4000 Series could allow an authenticated, local attacker to cause a...

6.0
CVE-2022-20843 2022

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remot...

4.8
CVE-2022-20826 2022

A vulnerability in the secure boot implementation of Cisco Secure Firewalls 3100 Series that are running Cisco Adaptive Security Appliance (ASA) Softw...

6.4
CVE-2022-20844 2022

A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unau...

5.3
CVE-2022-20824 2022

A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attac...

8.8
CVE-2022-20823 2022

A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of se...

8.6
CVE-2022-20842 2022

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to exec...

9.0
CVE-2022-20827 2022

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to exec...

9.0
CVE-2022-20841 2022

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to exec...

9.0
CVE-2022-20825 2022

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated...

9.8

Showing 10 of 25

FAQ

What is the default password for Cisco Cisco RV260?

The most common default credentials for Cisco Cisco RV260 are listed in the table above. Always change these immediately after setup.

What is the default username for Cisco Cisco RV260?

The default username for Cisco Cisco RV260 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.

How do I change the password on Cisco Cisco RV260?

Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.

How do I reset Cisco Cisco RV260 to factory defaults?

Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.

Is it safe to leave default credentials unchanged?

No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.

What IP address do I use to log in to Cisco Cisco RV260?

The default admin login address for Cisco Cisco RV260 is shown in the "Default IP" field above. Most routers use 192.168.1.1 or 192.168.0.1. Open a browser on a device connected to the router and navigate to that IP.

How do I change the Wi-Fi password on Cisco Cisco RV260?

Log in to the router admin panel at the default IP address. Go to Wireless or Wi-Fi settings. Find the WPA2/WPA3 passphrase field and update it. Save and reconnect your devices.

How do I secure Cisco Cisco RV260 after setup?

Change the default admin password and Wi-Fi password immediately. Disable WPS (Wi-Fi Protected Setup) — it is vulnerable to brute-force attacks. Enable WPA3 encryption if supported. Turn off remote management unless needed. Keep firmware updated.

Does Cisco Cisco RV260 have known security vulnerabilities?

Cisco Cisco RV260 has 25 known CVE vulnerabilities documented in our database. The full list with severity ratings is shown on this page. Apply the latest firmware update from the manufacturer to address known issues.

Related Devices