Aruba Networks Aruba AP-277
- The Aruba AP-277 is a wireless access point designed for high-density environments, offering reliable and secure connectivity.
Specifications
- LAN
- 1x GE
- PoE
- 802.3af
- USB
- 1x USB 2.0
- Mode
- AP, Mesh
- Wi-Fi
- 802.11a/b/g/n/ac
- Bands
- 2.4/5 GHz
- Ports
- 1x RJ45 console, 1x GE
- Range
- Outdoor long-range
- Radios
- 2
- Antenna
- Integrated directional
- Max Clients
- 255
- MU-MIMO
- No
- Antennas
- 2x2 MIMO
- Channels
- 20/40/80 MHz
- IP Rating
- IP66/67
- LAN Ports
- 1
- Controller
- Aruba controller or Instant
- Management
- Web, CLI, SNMP
- Operating Temp
- -40 to 65°C
Potential Threats
Default IP
192.168.1.250
Default admin panel address for Aruba Networks Aruba AP-277
Default Credentials — Aruba Networks Aruba AP-277
| Username | Password | Access Type | Protocol | Port | Notes |
|---|---|---|---|---|---|
| console | Console | — |
FAQ
The most common default credentials for Aruba Networks Aruba AP-277 are listed in the table above. Always change these immediately after setup.
The default username for Aruba Networks Aruba AP-277 is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to Aruba Networks Aruba AP-277 in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
