Amcrest Amcrest ASH21-W
- The Amcrest ASH21-W is a wireless IP camera designed for home and small business use, featuring 2MP resolution and night vision capabilities.
Specifications
- WDR
- Digital WDR
- Lens
- 3.6 mm
- Mode
- Indoor Wi-Fi camera
- Wi-Fi
- 802.11b/g/n
- Audio
- 2-way audio
- Cloud Management
- Yes
- Storage
- microSD
- Management
- Amcrest View Pro, web
- Resolution
- 1920x1080
- Compression
- H.264
Potential Threats
Default IP
192.168.1.123
Default admin panel address for Amcrest Amcrest ASH21-W
Default Credentials — Amcrest Amcrest ASH21-W
FAQ
The most common default credentials for Amcrest Amcrest ASH21-W are listed in the table above. Always change these immediately after setup.
The default username for Amcrest Amcrest ASH21-W is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to Amcrest Amcrest ASH21-W in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
