Amcrest Amcrest 4K NV4132-HS
- The Amcrest 4K NV4132-HS is a network video recorder (NVR) that supports up to 16 cameras and offers 4K resolution at 30 frames per second.
Specifications
- LAN
- 1x GE
- PoE
- No
- Audio
- 1 in / 1 out
- Ports
- 2x USB
- Storage
- 2x SATA, up to 20 TB
- Channels
- 32
- LAN Ports
- 1
- Management
- HDMI, VGA
- Resolution
- 12 MP
- Compression
- H.265+/H.265/H.264+/H.264
Potential Threats
Default IP
192.168.1.123
Default admin panel address for Amcrest Amcrest 4K NV4132-HS
Default Credentials — Amcrest Amcrest 4K NV4132-HS
FAQ
The most common default credentials for Amcrest Amcrest 4K NV4132-HS are listed in the table above. Always change these immediately after setup.
The default username for Amcrest Amcrest 4K NV4132-HS is typically "admin". The full list of default credentials including username, password, access type and port is shown in the table on this page.
Log in to the admin panel using the default credentials listed above. Navigate to Administration → Password or System → Account settings. Enter the current password and set a new strong password. Save the changes.
Locate the Reset button (usually a small pinhole on the back/bottom of the device). Hold it for 10-30 seconds while powered on until the LEDs flash. The device will reboot with default settings.
No. Default credentials are publicly known and frequently exploited by automated scanners. Change the admin password immediately after first login.
No CVE vulnerabilities have been linked to Amcrest Amcrest 4K NV4132-HS in our database. This may mean the device has a good security record, or that vulnerabilities exist but have not been officially assigned CVE identifiers.
